AmbiCom WL1100B-AP Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 152)

Cingular Communication Manager Help

142

> Turn off GSM. This feature is valuable to any user who needs to turn off

the adapter in certain situations such as travel on an airplane or in

situations where low battery consumption is critical. Wireless cards can

also be enabled or disabled under the Windows Network Connections

Control Panel (also called Network and Dialup connections).

No Wireless Device

The GPRS roaming client will display No Wireless Device if it cannot

actively communicate with the EDGE/GPRS phone or PC card via its

modem. A No Card detect state will appear if a serial/USB interface is not

connected to the computer. It will also indicate this state if the phone is not

turned on, or if a wirelesss PC card is not inserted.

Resolution: Make sure the serial/USB cabled is connected to the computer

in its proper position. Make sure the phone is properly charged and turned

on, and if using a PC card make sure it is firmly inserted in your PC's

PCMCIA slot.

You must have a valid modem connection associated with your

EDGE/GPRS phone or PC card.

Check your Phone and Modem Properties:

1. Select Phone and Modem properties from the Control Panel.

2. Select the Modem tab in the Phone and Modem options window. If you

do not see a modem installed that is configured to use with your

EDGE/GPRS phone you must configure one manually. Go to step 3.

3. Select Add from the window dialog.

4. Check Don't detect modem I will select it from a list, press Next.

5. Make sure Standard Modem Type is highlighted in the Manufacturer

window. Select Standard 56000 bps Modem from the Models window.

6. Press Next.

7. Select the COM port the GPRS connection is using.

Note: If you do not know the COM port you can check the device

manager for under Control Panel > System > Hardware > Device

Manager; then select Ports under the listing of devices. The COM port

being used by your GPRS connection should be displayed.

8. Select Next. Your configuration will be updated to use the modem on

the COM port you selected.

9. Press Finish to complete the installation.

1 2 ... 147 148 149 150 151 152 153 154 155 156

Nessun commento

AmbiCom WL1100B-AP Guida alla Risoluzione dei Problemi Pagina 152